ISOBUS Task Controller: Part 4

VIRTEC display.

In Part 3 of my Task Controller series, I promised to get this Part 4 out close to the time of Spring Plugfest … and I missed by over a month. Regardless, here is Part 4.

In this Task Controller (TC) series, I have detailed data collection and variable-rate application. The final big feature of TC is Section Control. This feature also has an ISOBUS Functionality called TC-SC. Most people have an idea what section control is, but for the uninitiated … section control will turn on/off various controllable sections of an implement to avoid overlap in a field.

ISOBUS Spring 2015 Plugfest Wrap-up

Plugfest

Last week in Lincoln, NE, engineers from around the world converged for another ISOBUS Plugfest to test their ISOBUS devices with other manufacturers’ ISOBUS devices. If you do not know what ISOBUS is, then you probably have not read any of my previous blog posts! At the crux of ISOBUS is the ability to connect many different types of electronic components together from different manufacturers and have them all work together. So Plugfest provides the opportunity to test that all the different equipment works well together.

ISOBUS Task Controller: Part 3

VIRTEC display.

I discussed in Part 2 of the Task Controller (TC) series a type of TC that uses geo-referencing for data-logging. This form of TC has an AEF Functionality called TC-GEO, but there is another type of TC-GEO that is very enticing to farmers. Using prescription mapping and TC-GEO, a farmer can do variable-rate application to control the amount of fertilizer, herbicide, or other inputs by position in the field. Some of the obvious benefits of this approach include reduced input costs, but there are also environmental benefits.

Spring has Sprung

photo:  freeimages.com

Do not look now (or at least come back to finish reading this if you do), but something important started again this week for the new year. It is not something that was unexpected because it starts every year at about the same time. But it is always a little exciting to see it when it happens. I am not talking about my strawberry plants showing some green, my flowers blooming, or my trees budding – though those are all happening. No, instead I am talking about the USDA Crop Progress report starting again for the new crop season. The last one of 2014 was published on November 24th, 2014, so it has been a few cold months to get to this point.

ISOBUS Task Controller: Part 2

VIRTEC display.

In the last Task Controller (TC) post, I gave a broad outline of how a TC session works in the general case. In this post, I will start describing some of the different types of TCs and Tasks. These can range from very simple to very complex.

The simplest form a TC can take actually has an associated AEF Functionality associated with it: TC-BAS, which stands for Task Controller – Basic. With this type of TC, only totals are logged for a particular task.

ISOBUS Task Controller: Part 1

VIRTEC display.

A few months ago in this blog I gave a very broad overview of Task Controller (TC).  The Virtual Terminal is probably the best-known ISOBUS feature given its visual prominence, but TC is a popular topic to discuss in the ISOBUS world because it offers many intriguing possibilities … and seeks to fulfill many of the promises of precision agriculture across manufacturers.  I thought it would be useful to spell out some of the details of TC as it can be a quite confusing subject.  In this post, I will walk through the components and the steps of a typical TC session.

Reflections on Fall Plugfest

Logo for the AEF

The Fall ISOBUS Plugfest has wrapped up here in Senlis, France. This Plugfest set a new record for attendees and participants. The final tally was over 250 attendees, 40 different test stations, 137 participants, 82 implements, and over 2300 test slots. It was quite a busy event, so kudos to the organizing committee for working through all those logistics. The slots were shortened to 20 minutes each which is probably a bit too short, but there is ongoing conversation to increase that again … possibly using some “creative” means. And with so many people attending, the building facilities are also an important consideration which seems to have worked out quite well.

VIRTEC ISOBUS in Agricultural Engineering Education

Ag Engineering Students

For one specific set of students, a brand new school supply will be getting added to the mix. Students in the Ag Engineering program at Iowa State will be getting the opportunity to experiment with ISOBUS using DISTek’s recently released VIRTEC software libraries. There will be a couple different usage scenarios for VIRTEC at ISU. The first scenario will be for graduate research projects. The graduate students and the school work with a wide range of Ag equipment manufacturers developing cutting edge technologies, and connecting these technologies to ISOBUS is very beneficial. The second scenario will be for classroom lab exercises. These students will get a chance to do some real hands-on ISOBUS application development in a lab setting rather than simply learning about it in lectures and readings.

Big Data Conference

Big Data is collected during harvest

On August 25, 2014, Precision Ag put on a Big Data conference at Iowa State University in Ames. While the conference appeared to originally target producers more than the industry providing to the producers, the audience ended up being about 50/50 between those two groups. Attendance for the conference was approximately 300 people from all over the country.

Introduction to Task Controller

Does anyone walk beans anymore? Early in my life, my dad’s three favorite herbicides for beans were my sister, my brother, and me. We spent many hours walking miles in the hot summer sun and learned many interesting plant names in the process: hemp dogbane, pigweed, velvetleaf, lambsquarter. Over the years it apparently became more economical to plant the beans closer together which made walking them nigh impossible, and my job morphed from walking the beans to driving the truck with the water and herbicides for filling the sprayer. Since I am less involved with the farm these days, I no longer know the costs of various chemicals, but I know even in the mid-90s that a small canister might go for $400. With inflation and the increased costs of raw materials, I am sure some of the chemicals are even higher cost now.

ISOBUS Schematic

Every dollar saved in spray (or seed or fuel or …) is a dollar toward the bottom line profit, so naturally as these input costs go up the motivation to reduce waste of those inputs goes up. Technology has existed for quite some time to give farmers the ability to reduce waste with variable-rate-application and section control. But what has only more recently become available is the ability to integrate various manufacturers’ equipment together to achieve these technologies using ISOBUS. ISOBUS terminals have become increasingly common in tractor cabs to offer a nice GUI to the operator to manually control implements. With ISOBUS Task Controller, a single device in the cab can control the variable-rate or section control capabilities of an implement. Task Controller has the additional capability of recording data … either total data such as for a baler, or Geo-logged data as the implement is pulled through a field.

Wanted: A new corn-growing catch phrase

Young corn soaks up the sun.

The “Knee-high by the fourth of July” phrase needs to go. It is long overdue for a new phrase because this one has not been a good measuring stick for corn for decades. The only grass (corn is a grass, for those who did not learn that tidbit of info as a farm kid) that should be knee-high on the fourth of July is the grass on the edges of my yard when I do not get out the string-trimmer. These days, waist high is probably the minimum acceptable height for most areas of the country,