Working with Engineers

Don’t Make a Mountain out of a Mole-HiL

by

Hardware in the Loop (HiL) systems are used in the development and test of real-time embedded systems often found in Electronic Control Units (ECU) within almost any on- or off-highway vehicle today. HiL systems are comprised of both hardware and software that can simulate the larger entity (i.e. car, tractor, etc.), so that the smaller ECU can be inserted into that larger system to determine whether or not it’s internal real-time embedded system is performing as intended. While this may seem like a mountainous task for vehicle manufacturers in industry today, DISTek has invested in tackling the design and production of an internal HiL solution.

Better Late than Never – Year in Review/The Future

by

Indeed I am a little tardy in my year-in-review blog entry. But, without further ado, here is my one-and-a-half-month-late DISTek Year-in-Review, coupled with a look toward the future to finish the DISTek: Past, Present (parts 1 & 2), and Future series of blog posts.

Alternative Tools Lead to Creative Solutions

by

Here at the DISTek products department, we’re always looking for ways to make our user’s lives easier. As engineers that use our own products, this is doubly important to us! We’ve identified that open source tools can be one possible solution to alleviate potential issues down the road.

We spend a lot of time designing user interfaces for ISOBUS VT clients. There are a few tools currently on the market, and while these tools get the job done, we’ve found a few shortcomings…

I’m Starting to Feel Like an Owner

by

Employee Owned

Just recently I was awarded a Certificate of Appreciation for ten years of excellent service and valuable contributions to DISTek Integration. Needless to say, I’m quite thankful and happy to have been involved with DISTek for the past ten years. Wow! I’ve been employed here for ten years? It sure doesn’t feel like ten years. Maybe that’s partly because since December of 2014, I, like many others at DISTek, became employee owners, after DISTek founder Matt Dickinson decided to share a part of his company with his employees by forming an ESOP – an Employee Stock Ownership Plan. That’s right, DISTek is employee owned.

I’m not sure when…

Assessing the Entire Functional Safety Hazard Space

by

Safety is a challenging status to achieve and maintain, thus the need for the guidelines that collectively fall under the heading of Functional Safety (FS). DISTek has always been conscience of safety as it applies to the products developed for our customers. This includes implementing the various requirements and guidelines associated with Functional Safety, as expressed in documents, such as ISO 25119.

Holiday Elves

by

♫It’s the most wonderful time of the year♫…..DISTek continues the tradition of giving back:

Once again this year, as in previous years, the DISTek Cedar Falls office adopted two families from the Waterloo school district to help make their Christmas a little extra special. We received a wish list from each of the families and shared these with DISTek Elves (employees) who set about fulfilling everything (and even some extra items) on their lists. As usual, Elves were very generous…

DISTek Turns 25: Past, Present, Future

by

The Present – Part 2

In the last phase of DISTek’s 25 years, we expanded our engineering services again. The concept of model-based software development (MBSD) had been in use for a few years at several of our off-highway customers and we had gained experience with it. But as we surveyed the market landscape……..

Reducing Bugs with Simulink Dashboards

by

Have you ever played the game “telephone”? It’s where you have a line of people and starting on one end someone whispers something into someone’s ear. That message is then passed on to the next person and so on and so on. Once it reaches the final person, you may find out that the message was misinterpreted. “Big dog” may have changed to “bed bug”. This is one of the major problems that have plagued software design and something I see on a regular basis. Engineers receive requirements that were already passed down through other people, so the engineer is left to interpret them the best they can.

Intern Testimonial: Parting Thoughts from David

by

Here at DISTek, we place a strong emphasis on our internship program. Every summer we hire a handful of interns to work alongside our teams to not only provide mentor-ship for those entering the field, but also to, hopefully, entice some of the best and brightest to join our ranks after graduation. This summer we were lucky enough to have David Schmadeke, an Electrical Engineering major at Iowa State University, join our internship program.

How To: Reduce Memory Consumption in LabVIEW Data Acquisition Applications

by

Acquiring and/or logging high speed data, using the traditional DAQmx scaling approach, will consume considerable amounts of memory due to its use of the double precision data type. Each sample collected will consume eight bytes of memory whether being stored in memory or on disk. This size is fine when collecting data at lower rates, but if you are collecting data at a rate of 1 MS/s, eight bytes per sample is too much for most systems to handle.

Spring 2017 ISOBUS Plugfest Recap

by

Once again, the AEF put on another successful ISOBUS Plugfest last month. Approximately 130 individuals associated with electronics for Ag equipment spent the week of May 8th at the Embassy Suites in Lincoln, NE. The key attraction is the Plugfest itself, during which nearly 1000 combinations of implement ECUs and displays were tested.

DISTek Integration, Inc.
Company
How We Work
About Us
Find A Career
Our Expertise
Vehicle Simulation
Embedded Software
Vehicle Networking
Application Areas
Vehicle Controls
Electrification
Autonomous Vehicles
Precision Ag
Resources
Blog
Contact Us
DISTek Integration, Inc.
6612 Chancellor Drive #600
Cedar Falls, Iowa 50613
319-859-3600
Privacy Policy · DISTek Intranet
Copyright 2024 DISTek Integrations, Inc. All rights reserved.